How To Remove A Sharkbite Fitting: A Comprehensive Guide

Introduction

Sharkbite fittings are known for their easy installation removal but sometimes even the best fittings can cause problems. In this article we will guide you through the steps to remove a Sharkbite fitting with ease.

Step-by-Step Guide

Step 1: Turn Off Water Supply

Before starting the removal process always turn off the water supply to the fitting. This will prevent any water from leaking during the removal process.

Step 2: Ensuring Proper Tools

When it comes to removing Sharkbite fittings there are specific tools that you will need. These tools include a Sharkbite removal tool pliers a wrench.

Step 3: Loosen the Fitting

Take the Sharkbite removal tool slide the tool onto the pipe. Push it up against the fitting until it latches onto the release collar. Then tug the fitting off the pipe. If it doesn’t come off try rotating the fitting about a quarter turn before tugging again.

Step 4: Twist Pull

If the Sharkbite removal tool isn’t successful grab a pair of pliers twist the fitting back forth. This movement will help dislodge the fitting from the pipe. After a few twists try pulling the fitting off the pipe.

Step 5: Use a Wrench

If the pliers still don’t work use a wrench to loosen the fitting. Place one jaw of the wrench over the Sharkbite fitting the other over the pipe. Twist the wrench to loosen the fitting then pull the fitting off the pipe.

Step 6: Clean the Pipe

After removing the Sharkbite fitting clean the pipe of any debris or burrs. Use sandpaper to smooth any rough edges or bumps.

Conclusion

Removing a Sharkbite fitting can be a simple process with the right tools steps. Remember to ensure that the water supply is turned off use a Sharkbite removal tool pliers or wrench to remove the fitting. If you encounter any issues or difficulties seek the help of a professional plumber.